theazz

I have a 2007 RX350 and while changing out an ignition coil I pulled out the wires on the camshaft position sensor "B" Bank 1 connector.

I bought a new connector and wire for it. It has 3 wires on the connector. Does anyone have the electrical manual for the 2007 RX to tell me what pin on the connector goes to the harness wires so I can solder them in (a diagram would be great). The harness wires are yellow black and white.

Thanks

Theazz

jakenbake

If you go to this site, you can have any wiring diagram, repair manual, accessory information, all the information dealership has. It costs $15 for two days of access.
https://techinfo.toyota.com/

theazz

Thanks I think I'll do that"