BounceNY

iTrader: (9)

For the rears, there are two bolts that mount the OEM shock/strut to the chassis. The BC Coilovers don't have the tabs on them to mount them to the chassis. So basically it seems as though the BC coilover just mounts at the top (3 screws) and the one big bolt on the bottom. Is this how it should be?

Also, anyone have the p/n for the big bolt that connects the bottom of the shock? Mine wouldn't come out easily and I would like to buy another one.

Likwid XTC

iTrader: (5)

I think swell has diagrams u can look at with product numbers. Take a look at there site


Any trick on getting the bolt out of the shock. Mine is in there pretty good. As well

BounceNY

iTrader: (9)

My father had to cut it off which was a B$&@h.

IXI187IXI

iTrader: (3)

heres the diagram and this is the parts list. I see the bolt says 91672-G1482(2) but i dont see anything on the list matching that

BounceNY

iTrader: (9)

Thanks for the diagram! Hmm I think its 91672-G1485(2).

B16da9

iTrader: (7)

Don't worry about those two bolts even the RWD BC model does not have them.

BounceNY

iTrader: (9)

Cool, that's good news. Soaking the other bolt over night, hopefully the other side will come out easier.