Reset oil maintenance light
Reset oil maintenance light
02-03-10, 08:22 AM
#2
Lexus Champion
02-03-10, 08:29 AM
#3
To reset the data, perform the following operations:
1. Push the “ODO/TRIP” button to change the display to blank.
2. Turn the ignition switch off.
3. Turn the ignition switch to “ON” with the trip meter "RESET” button held down.
4. Keep pushing the “RESET” button for longer than 5 seconds after the ignition is turned on.
After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.
1. Push the “ODO/TRIP” button to change the display to blank.
2. Turn the ignition switch off.
3. Turn the ignition switch to “ON” with the trip meter "RESET” button held down.
4. Keep pushing the “RESET” button for longer than 5 seconds after the ignition is turned on.
After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.
02-03-10, 09:31 AM
#4
Pole Position
Join Date: Dec 2008
Location: CA
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
To reset the data, perform the following operations:
1. Push the “ODO/TRIP” button to change the display to blank.
2. Turn the ignition switch off.
3. Turn the ignition switch to “ON” with the trip meter "RESET” button held down.
4. Keep pushing the “RESET” button for longer than 5 seconds after the ignition is turned on.
After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.
1. Push the “ODO/TRIP” button to change the display to blank.
2. Turn the ignition switch off.
3. Turn the ignition switch to “ON” with the trip meter "RESET” button held down.
4. Keep pushing the “RESET” button for longer than 5 seconds after the ignition is turned on.
After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.
Thread
Thread Starter
Forum
Replies
Last Post
abbeyrd
SC430 - 2nd Gen (2001-2010)
7
12-18-10 03:06 AM
